Direct Manufacturer Of G100 8620D Load Chain

The inspection work that needs to be done before using the 100 level chain

There are many uses of 100-level chain, which is a very common one in the large family of lifting chain. More and crane supporting use, by the crane, there are generally 100 level chain figure. Because of this, the 100-level chain needs to be checked before each operation is used to ensure the normal and safe operation. Why do you say that? Crane is a large equipment, to participate in the operation is certainly the lifting of large goods, when the operation of the chain if broken, the consequences can be imagined. So what does a pre-use check involve? Let's have a look!

The first thing to check is whether the chain is elongated, because if the chain is elongated, its load-bearing capacity will change. Then check the wear and tear between the chains, because when using the chains, most of the time is tilted, which also causes friction between the chains, the chains will be thin, which will also affect the load-bearing capacity.

The 100-level chain belongs to the lifting chain, so it is necessary to check the work before use. We need to get a reference data after the inspection, calculate its load-bearing capacity, whether it can bear the burden of this operation, can not afford to scrap and replace immediately, only in this way can the operation be carried out more smoothly.