18 X 54mm Alloy Steel Grade 80 Lifting Chain in EN818-2 Chain Specification

Product Description EN818-2 lifting chain is lifting short link chains, which is used for lifting purpose. We use high qualified alloy steel to produce G80 chains (Mn alloy steel), all G80 chains will be approved by 6-meter proof load test, breaking link rate is 1/10000, which exceed industrial...

Send Inquiry

Product Introduction

Product Description

EN818-2 lifting chain is lifting short link chains, which is used for lifting purpose. We use high qualified alloy steel to produce G80 chains (Mn alloy steel), all G80 chains will be approved by 6-meter proof load test, breaking link rate is 1/10000, which exceed industrial level 6/10000.

Chain Material: 20Mn2A, 25MnV, 23MnNiCrMo54 etc

Production standard:EN818-2

Chain grade:G80

Safety factor:6 meter breaking load test, 2.5 times proof load test, 4 times safety factor.

Surface treatment: black oixde, electroplate, black painted etc

Product Specification of EN818-2 short link chains:

diameter mm	Pitch mm	Outside width mm	Working load limit ton	Proof load KN	Breaking load KN	Weight Kg/m
4	12	13.3	0.488	12.33	19.70	0.35
5	15	17	0.75	19.28	30.8	0.54
6	18	20	1.12	28.3	45.2	0.8
7	21	24	1.5	38.5	61.6	1.1
8	24	27	2	50.3	80.4	1.4
9	27	30	2.49	62.4	99.8	18
10	30	34	3.15	78.5	126	2.2
11	33	37	3.715	93.2	149	2.74
12	36	41	4.41	106.2	177.4	3.24
13	39	45	5.3	133	212	3.8
14	42	48	6	152	242	4.3
16	48	54	8	201	322	5.7
18	54	62.64	10	254	407	7.3
19	57	66	11.37	283	453	8
20	60	70	12.5	314	503	9
22	66	74	15	380	608	10.9