Ways to reduce the wear of lifting chain:

Abrasion of the lifting chain during use is inevitable. All we can do is find ways to slow down the chain wear and extend its service life as much as possible. So what methods can slow down the chain wear?

1. The tightness should be appropriate, not too loose or too tight. If the chain is too tight, it will increase consumption, and the bearing and chain will wear faster; if the chain is too loose, it may jump the chain.

2. The new and old chains should not be mixed together as much as possible. Since their chain links are not synchronized, it is very likely that the load will be concentrated on one chain, and the chain will break because it cannot fully withstand the load.

3. Do a good job of lubrication, can generate a layer of oil film, while improving sensitivity, protect the chain from being affected by temperature.

4. Adjust the length and adjust it according to the operating environment. If it is too long, we need to cut it and strictly prohibit overloading.

The above is the way to slow down the wear of the lifting chain. If you have other things you want to know, you can send an email to consult.

OUR FACTORY

 

welcome !!!