Products Description

Hazards of overloading the Welded Mining Chain?

Each Welded Mining Chain is marked with the load capacity of the chain.When we use the chain for lifting work, we need to check whether the weight of the lifting object is within the load range of the chain before we can officially carry out the lifting work. So, what are the hazards of overloading the chain? Let's analyze it in detail below.

Hazard one, shorten the service life of the chain. Each Welded Mining Chain has a fixed load range. If the weight of the lifting object exceeds the maximum load of the chain, continued use will easily cause plastic deformation of the chain, increase the amount of chain wear, and reduce the service life of the chain.

Hazard two. Increase the risk of work. If the weight of the lifting object exceeds the maximum load capacity of the chain, if it continues to be used, the swinging amplitude of the lifting object will increase during the lifting process, and at the same time, the possibility of the lifting object falling down will also increase. Increase. Increase the risk of work.

The above are the hazards of overloading the lifting chain. We must strictly abide by the safe use regulations when lifting, so as to increase the safety of our door. And overloading will not only save trouble, but also delay the construction period and increase operating costs.