Zinc Plated Grade 80 Load Chain For Lifting Chain Hoist
Grade 80 load chain is lifting short link chains, which is used for chain hoist, lever hoist and electric chain hoist etc. We use high qualified alloy steel to produce hoist chains (Mn alloy steel), all hoist chains will be approved by 6-meter proof load test, breaking link rate is 1/10000, which exceed industrial level 6/10000.
Chain Material: 20Mn2A, 25MnV, 23MnNiCrMo54 etc
Production standard:BS EN818-7
Chain grade:G80
Technical Parameter of EN818-7 Grade 80 Load Chains:
Nominal size dn | Material diameter tolerance | Pitch | Width
| Gauge length | Weld diameter ds max. | |||||
pn | tolerance | Internal W3 min | External W2 max | 11 x pn | tolerance | |||||
4 | ± 0,2 | 12 | 0,25 | 4,8 | 13,6 | 132 | 0,6 | 4,3 | ||
5 | ± 0,2 | 15 | 0,3 | 6,0 | 17,0 | 165 | 0,8 | 5,4 | ||
6 | ± 0,2 | 18 | 0,35 | 7,2 | 20,4 | 198 | 1,0 | 6,5 | ||
7 | ± 0,3 | 21 | 0,4 | 8,4 | 23,8 | 231 | 1,1 | 7,6 | ||
8 | ± 0,3 | 24 | 0,5 | 9,6 | 27,2 | 264 | 1,3 | 8,6 | ||
9 | ± 0,4 | 27 | 0,5 | 10,8 | 30,6 | 297 | 1,4 | 9,7 | ||
10 | ± 0,4 | 30 | 0,6 | 12,0 | 34,0 | 330 | 1,6 | 10,8 | ||
11 | ± 0,4 | 33 | 0,6 | 13,2 | 37,4 | 363 | 1,7 | 11,9 | ||
1)These tolerances are usually divided into + 2/3 and –1/3 for both the individual link and the standard gauge length. | ||||||||||
Factory Workshop Display:





Hot Tags: zinc plated grade 80 load chain for lifting chain hoist, China, manufacturers, suppliers, wholesale, Black Lifting Chain, Mining Steel G80 Lifting Chain, Blacken Alloy Steel Chain, G80 Painted Fishing Link Chain, Grade 100 Transport Chain, G70 Chain
You Might Also Like
Send Inquiry













