Manganese Steel Lifting Chain
Product introduction：
The manganese steel lifting chain will stretch due to wear and tension during use. Under normal circumstances, the position of the rear axle can be changed by adjusting the manganese steel lifting chain regulator to achieve the adjustment of the tightness of the manganese steel lifting chain. the goal of. However, sometimes the manganese steel lifting chain is extended too much, and the phenomenon that the shaft is adjusted to the final limit position after the manganese steel lifting chain is still too loose occurs. At this time, the manganese steel lifting chain should be replaced or the manganese steel lifting chain should be cut off.
Manganese steel lifting chain:
Structure: Welded Chain, Combined Chain
Material: Alloy steel, steel, Alloy, 20MN2A, 20Mn2
Standard or Nonstandard: Standard
Strength Grad：G70,G80,G100
Elongation of Chain Breaking：≥ 16%
Packing List：Plywood reel/plastic reel or as demand
Technical Parameter:
Code | size | width mm | weight | Break min. | |
inner width min. | outer width max. | ||||
FC0720110/60 | 7×21 | 10 | 25,5 | 105 | 60 |
FC1003014/125 | 10×30 | 14 | 36 | 2,2 | 125 |
FC1303918/214 | 13×39 | 18.1 | 47.1 | 3.8 | 214 |
FC1604822/320 | 16×48 | 22.4 | 57.4 | 5.63 | 320 |
FC1905728/450 | 19×57 | 27.8 | 68.8 | 7.81 | 450 |
FC2006029/500 | 20×60 | 29 | 72 | 8.52 | 500 |
Hot Tags: manganese steel lifting chain, China, manufacturers, suppliers, wholesale, Short Link Chain, G80 Grade Lifting Chain, Manganese Steel Lifting Chain, South Africa Standard Short Link Chain, G80 Rigging Chain, Grade 80 Polishing Lifting Chain
You Might Also Like
Send Inquiry