Commercial open link chain wear failure analysis:
Commercial open link chain has always been favored by major companies and construction workers due to its good performance. However, after a long period of use, it will wear out to some extent. If the wear is severe, it will affect normal operation and use, resulting in chain failure. malfunction. In order for you to further understand and avoid this phenomenon, we will explain in detail below.
Commercial open link chain is a common and obvious case that the G80 chain is subject to wear and tear, and there are many reasons for this failure, mainly due to the poor quality of the chain and improper operation by the staff. The most vulnerable parts of the G80 chain as a whole are its pins and sprocket wheels. The severe abrasion of these two parts is usually caused by insufficient local lubrication. Therefore, in order to solve this problem, the staff should regularly check the lubrication effect of the equipment and perform the lubrication work in a timely manner. At the same time, they should also pay attention to the performance of the use of lubricants to avoid the occurrence of abrasives in the oil.
If you find slight wear on the G100 link chain in use, we can reverse it so that the lighter side is facing the chain. In addition, if the working environment is poor, the wear of the chain will be accelerated. If the chain hinge is worn, the chain links will become longer, which will easily lead to tooth skipping or disconnection during operation, which will greatly reduce the life of the equipment and accelerate the failure of the Commercial open link chain .
Obviously, in order to avoid the occurrence of wear failure, the corresponding maintenance and repair work of the Commercial open link chain should be performed in time.
