What should I do if the stainless steel chain rusts?
Stainless steel chains are rusty, because the actual operation of human error is not good, and the removal of protection and maintenance is not timely. Then the transmission chain is corroded, how to start anti-rust treatment?
Generally speaking, all stainless steel chains use the acid-alkali derusting method. Wipe the pickling paste on the surface of the transmission chain. It is not necessary to wipe it too thick. It can be wiped on one layer evenly. The soft brush with technical expertise brushes off the air oxide layer on the surface, and it can be cleaned regularly with cold water.
When the anti-rust treatment of the stainless steel chain with pickling paste is carried out, the pickling paste must first be wiped on the surface layer of the stainless steel chain, most of the thin thickness is 0.5-2mm, and the general reflection time is 3-10 When the temperature is below 0 ℃ or the air oxide scale is thick, the time must be increased a little, about a minute, and it is better to clean it with a soft brush during the entire process. It must be cleaned with cold water, which is to prevent rust. It also means that if the product finds cold water, it does not need to be discarded. It can be used after shaking and mixing.
