As a commonly used transmission device in lifting equipment, g80 transport chain is often used in places with high power and slow running speed. Best Chain reminds everyone that in order to ensure its good application effect, daily cleaning and maintenance work Not sloppy.
In order to reduce the friction of the g80 transport chain during work, it is usually designed as a hyperbolic arc. Although the device itself has good application performance, it must not forget to do a good job of cleaning after each use, especially in the wet season. In the environment, the operator should carefully wipe with a dry cloth to ensure the chain is dry and clean. If the surface of the device is too dirty, you can use a small brush to clean the joint gaps and remove the accumulated dirt.
When cleaning g80 transport chain, do not use corrosive cleaning agents to avoid damage to the chains. In addition, avoid the use of organic solvents with strong stain removal capabilities. This will clean the chain of grease. Lubricating oil is very important for the g80 transport chain. Once it is missing, it will break its normal working environment. Therefore, if it is found that the lubrication of the chain is not in place, the lubrication work must be carried out. However, if you want to achieve a good lubrication effect, you need to ensure the cleanliness of the chain before lubrication.




