Due to incorrect cleaning and maintenance methods due to human factors, rust spots appear on the stainless steel lifting chain. How should the rust spots on the surface of the stainless steel galvanized chain be removed?
To remove the rust spots on the surface of the stainless steel chain, pickling paste can be used to improve the surface finish of the stainless steel chain. When the stainless steel is in operation, apply the pickling paste to the surface of the stainless steel chain. The thickness of the coating film is 0.5-2mm. The time is more than 3-10 minutes. When using under 0℃ or thick oxide skin, it needs to extend the time appropriately. It is best to use a brush to wash several times during the treatment process. After the surface oxide skin is completely removed, use clean water (lime water or alkaline water) (Better) Rinse well to avoid rust back. If this product appears clean water, don't pour it out, shake or stir well before use.
When stainless steel lifting chains have rust spots on the surface, they should be cleaned up in time and cleaned in accordance with certain cleaning techniques so that they will not cause fatal damage to the chain.
