Level 80 chain in the operation is often appeared with the crane, by hook to link, since is working with the crane, it should pay more attention to safety, after all, the crane belongs to large mechanical equipment. How is it safer to use the 80 machine chain in practice?
The first thing is to control the speed. This speed means that when the crane lifts the cargo, the rising speed and the translation speed should not be too high. If it is too low, it can affect the working process. Then there is the Angle, which is the initial Angle of the cargo. If there is no special case, it should be lifted vertically. Secondly, the float of vibration control should be small during the use. The other thing is to check the wear of grade 80 chain on time, especially the wear of the joint and connector, and replace the new chain in time if any problem is found.
Although the operating standards of grade 80 chain do not have too many provisions, but still need to be used in strict accordance with the provisions, after all, these are a long time to use summed up experience, everything is for the sake of safety. It should be noted that the regular inspection is the work that needs to be done before use every day, rather than when you remember it and when you check it. After the inspection, you should record the wear condition to facilitate troubleshooting.
