Level 80 chain is the need for surface treatment, the reason is, after all, the general of the chain is in outdoor work, and work intensity is high, especially in hot summer, the sun always point-blank, without surface treatment, are likely to appear corrosion rusty phenomenon, generally there are three kinds of ways of dealing with, polishing, black and galvanized. Here is an introduction to polishing. Let's take a look.

Polishing hoisting chain surface treatment :(1) put sodium nitrite, water or leather in the stainless steel bucket and other high-speed operation to carry out grinding and polishing, so that the wear-resistant material on the 80 level chain surface caused spray welding, and then make the surface more and more bright. (2) grinding and polishing can not improve the specification precision or geometric shape precision of the steel, but can make the surface with gloss. (3) the goal of putting sodium nitrite is to avoid the corrosion of grade 80 chain in a short time (after drying, under the standard of dry and natural ventilation, it is generally not easy to rust within half a month). Lifting and hoisting of grade 80 chain after grinding and polishing must be dried first. After drying, oil can be coated before packaging.
Polishing 80 level chain technology is still more complex, don't look at the end of the introduction in two or three sentences, but there are a lot of details to pay attention to when the real processing, the customer can contact us, we give you a detailed answer.




