May 25, 2020 Leave a message

Precautions in the cleaning and lubrication of stainless steel chains:

As a kind of ordinary transmission device, stainless steel chain cannot be sloppy when it is cleaned and used normally, otherwise it will affect its use effect. Stainless steel chains are generally designed with hyperbolic arcs, the purpose is to reduce friction, used in places where the power is relatively large and the running speed is relatively slow.

However, after each use, you must not forget to clean the stainless steel chain, especially in rainy and humid environments. A dry cloth is required to wipe the chain and its accessories; if necessary, you can use an old toothbrush to clean the gap between the chains, and remove the dirt and sand accumulated between the chains.

When cleaning stainless steel chains, warm soapy water can be used, but remember not to use strong acid or strong alkaline cleaners, because these chemicals can cause damage or even break the chain. In addition, do not clean the stainless steel chain with a solution with added solvent, as it will cause damage to the chain.

In addition, the use of organic solvents such as degreased oil should be avoided during the cleaning of stainless steel chains. This will not only damage the environment, but also wash away the lubricants in the bearing parts.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry