The grade 80 chain needs surface treatment. After all, the general chain is operated outdoors, and the operation intensity is very high, especially in the hot summer, when the sun has been direct. Without surface treatment, the phenomenon of corrosion and rust is very likely. There are three general treatment methods, polishing, blackening, and galvanizing. Here is a brief introduction to polishing, let's take a look.
The surface treatment method of polishing grade80 lifting chain: (1) Put sodium nitrite, water or leather in a stainless steel barrel to carry out grinding and polishing at high speed, so that the wear-resistant material causes spray welding on the surface of the 80-level chain, and then the surface Come brighter. (2) Grinding and polishing can not improve the precision of specifications of steel parts or the precision of geometric shapes, but can make the surface layer quite glossy. (3) The purpose of putting sodium nitrite is to avoid the corrosion of the 80-level chain for a short time (after drying, it is generally not easy to rust within half a month under the standard of dry and natural ventilation). The hoisting and lifting of the 80-level chain must be polished and polished. Dry first, apply oil after drying and then package.




