The heat treatment of the Offshore Mooring Chain is a shortcut to promote production efficiency.
The endless chain is a key component of coal mining and transportation machinery traction. It has a large demand and strict quality requirements, especially related to the safety of coal production. Heat treatment is an important part of manufacturing, and its quality mainly depends on the quenching and tempering temperature control of the ring chain. The tempering temperature control requirement is very accurate.
Tempering: The Offshore Mooring Chain comes out of the water tank and then enters the tempering sensor at the original speed for secondary heating (differential temperature tempering). When the temperature in the middle of the chain ring reaches 650 degrees Celsius, the chain leaves the sensor and depends on air cool down. The purpose of tempering is to improve the plasticity of the round link. The quenching and tempering sensors are connected in series, and the chain is driven by a motor.
Quenching: The processed circular chain is driven by a constant-speed motor into the beacon sensor, which is heated in the sensor to increase the temperature of the chain link to 800-1000'C within tens of seconds. When the temperature reaches the specified temperature, the chain ring is cooled by spraying water at the sensor outlet. Then enter the sink for further cooling. The purpose of quenching is to increase the strength and hardness of the round chain and its service life.
The company will continue to work hard on the production of ring chains to improve the efficiency of chain use and ensure the production needs of enterprises.




