Mine-use high-strength circular chains are mostly used in scraper machines, which form scraper chains with scrapers, chain links and bolts. The service life of scraper conveyors mainly depends on circular chains.
The main wear forms of high-strength circular chain used in mining include vertical ring wear, erosive wear and rust wear.
The vertical ring wear of the scraper conveyor ring chain is widespread, and it is a typical form of damage for mining high-strength ring chains. During the movement of the circular chain, there is relative sliding wear between the chain ring and the chute, the chain ring and the sprocket, and the chain ring. Due to the wear, the elongation of the chain ring is increased, and the degree of meshing with the sprocket is reduced. , Causing the chain to jump and fall off.
The erosion and wear of the ring chain refers to the surface wear caused by the impact of materials. The erosion of the circular chain of the scraper conveyor occurs mostly when the coal carries water into the middle groove, the material impacts the chain, wears the surface of the chain, increases the elongation of the chain, and reduces the service life of the high-strength circular chain for mining .
The corrosion and wear of the ring chain is inevitable for the scraper conveyor of the coal preparation plant, which is mainly manifested as the corrosion of the chain by the moisture in the coal. After the high-strength mine circular chain is corroded, it is very easy to wear during operation and meshing with the sprocket, because the cross-section becomes smaller and the strength decreases.
In order to extend the service life of high-strength ring chains for mining and extend the service life of scraper machines, the chains should be assembled in strict accordance with the requirements to ensure that the length of the matching chains is consistent. When installing the ring chains, pay attention to the upward welding port and avoid the chain. The tightness of the circular chain of the scraper is suitable to ensure that it meshes well with the sprocket and runs smoothly without skipping the chain.




