Insturctions For Use Of Lever Blocks

Handle: for manual operation, lifting or lowering heavy loads by wrenching up and down.

Lifting chain: to connect the heavy object and bear the load.

Hook: for securing the weight.

Brake: ensure that the weight remains in position when the operation is stopped.

Check the equipment: make sure that the components of the lever block are in good condition and are not damaged or loose.

Confirm the load: Make sure the weight of the load is witnin the rated load range of the lever block.

Fix the hook: Fix the hook firmly on the lifting point of the load.

Trigger handle: Trigger the handle upwards, the lifting chain will start to tighten and the weight will rise slowly.

Stop operation: When the weight reaches the target position, stop triggering the handle, the brake will be locked automatically to prevent the weight from sliding down.

Lowering the weight: Trigger the handle downward, the brake releases and the weight slowly descends.

Unloading the load: Release the hook after placing the load in a safe position.

Putting away the equipment: Put the lever block away and store it properly.

Load Limit: Overloading is strictly prohibited, make sure the weight of the heavy object is within the rated range.

Regular Inspection: Regularly inspect the lifting chain, hook and brake to ensure that they work properly.

Operating environment: Avoid using in humid and corrosive environment to prevent equipment damage.

Safe operation: keep smooth during operation, avoid sudden force or fast trigger handle.

Cleaning: clean the equipment after use to prevent accumulation of dust and debris.

Lubrication: Lubricate the lifting chain and brake regularly to ensure smooth operation.

Storage: Store in a dry, ventilated place, avoid direct sunlight and humid environment.

Lifting chain stuck: check whether there are foreign objects stuck, clean up and re-operate.

Brake failure: stop using immediately, check whether the brake is damaged, replace if necessary.

Hook deformation: stop using immediately, replace the hook with a new one.

Overloading is strictly prohibited: overloading use may lead to equipment damage or accidents.

Avoid tilting operation: keep the weight vertical during operation to avoid tilting which may lead to equipment damage.

Emergency handling: In case of emergency, stop operation immediately and take appropriate measures.

Correct use and maintenance of the Lever block not only improves work efficiency, but also ensures safe operation. Please follow the instructions strictly to ensure the long-term stable operation of the equipment.