ISO High Test Windlass Chain G43
ISO High Test Windlass Chain G43:
ISO High Test Chain uses high tensile strength carbon steel that provides a greater strength-to-weight ratio than proof coil chain. ISO short pitch link which makes it more flexible and ideally suited as a windlass chain. Each link is proof tested and calibrated.
Check manufacturer’s specification prior to purchase.
Finish: Hot Dip Galvanized
Packaging: Full and Half Drums
Warning: Working Load Limit must not be exceeded. Not to be used for lifting or hoisting applications.
Specification of High Test Windlass Chain-G43:
| TRADE SIZE in | WIRE DIAMETER | INSIDE DIMENSIONS | WORKING LOAD LIMIT (WLL/SWL) | BREAKING LOAD LIMIT (BLL/MBL) | ||||||||
| mm | in | LENGTH | WIDTH | kg | kn | lb | kg | kn | lb | |||
| mm | in | mm | in | |||||||||
| 1/4 | 7 | 0.27 | 21.3 | 0.84 | 10.41 | 0.41 | 1180 | 11.5 | 2600 | 3540 | 34.6 | 7800 |
| 5/16 | 8.7 | 0.32 | 26.2 | 1.03 | 12.95 | 0.51 | 1770 | 17.3 | 3900 | 5310 | 52.0 | 11700 |
| 3/8 | 10 | 0.39 | 31 | 1.22 | 15 | 0.59 | 2450 | 24.0 | 5400 | 7350 | 72.0 | 16200 |
| 7/16 | 11.8 | 0.46 | 35.6 | 1.4 | 16.5 | 0.65 | 3270 | 32.0 | 7200 | 9810 | 96.0 | 21600 |
| 1/2 | 13 | 0.51 | 40.34 | 1.59 | 19.3 | 0.76 | 4170 | 40.9 | 9200 | 12510 | 122.6 | 27600 |
Hot Tags: iso high test windlass chain g43, China, manufacturers, suppliers, wholesale, Alloy Lifting Chain EN818 2, Open Link Chain, ASTM 80 G30 Chain, Astm 80 High Test Anchor Chain, Weld Norwegian Standard Link Chain, G43 Chain
You Might Also Like
Send Inquiry