The eye hooks should pay attention to the environmental conditions when used in conjunction with the rigging. At the same time, the rigging must not be twisted or tied. During the lifting of the hook, it is strictly forbidden to collide and impact the items being lifted.
The main method of checking the hook: generally use visual inspection, that is, carefully observe with a magnifying glass. If necessary, you can use the coloring method, or carry out flaw detection. The wear of the dangerous section can be measured with calipers or calipers; the inspection of the opening degree is to compare the measured size of the caliper with the original size or the opening degree of the standard hook.
At present, the ring eye hook is generally a forged single hook, and the cast hook is not allowed to be used on the crane. The ring eye hook is widely made of low carbon steel and carbon alloy steel.
The hook plays the role of connecting the crane and the heavy object, and must pay attention to its maintenance work. For this reason, when the lifting height limiter of the hook or the hook locking device fails or is damaged, it is absolutely forbidden to use it; as for the unauthorized employment, the corresponding person in charge should be held accountable.




