In order to ensure safety, the hook must be inspected, and when one of the following conditions is found, it should be scrapped immediately.
① Cracks appear.
② The amount of wear on the dangerous section shall be no greater than 5% of the original height according to the hook manufactured by GBl0051.2;
③ The opening degree is increased by 15% compared with the original.
④The torsional deformation exceeds 10 degrees.
⑤ Plastic deformation of the dangerous section or hook neck.
⑥When the wear of the board hook bushing reaches 50% of the original size, the core bush should be scrapped.
⑦When the wear of the plate hook mandrel reaches 5% of the original size, the mandrel should be scrapped.
It should also be noted that the above-mentioned defects of the hook cannot be repaired.




