After each time you clean, wipe, or wash the chain with solvent, be sure to add lubricant and ensure that the chain is dry before adding lubricant. First, the lubricating oil is infiltrated into the chain bearing part, and then it becomes viscous or dry. This will reliably lubricate the parts of the chain that are easily worn (two joints on both sides). Good lubricants, which start to feel like water, are easy to penetrate, but over time they become sticky or dry, which can last a long time.
After lubricating the oil, use a dry cloth to wipe off the excess oil on the chain to avoid the adhesion of dirt and dust. Before reinstalling the chain, remember to clean the links to each other to ensure that no dirt remains. After the chain is cleaned, it is necessary to put some lubricant on the inside and outside of the shaft after assembling the magic deduction.
